CheckPoint Splat - Setting up SCP

I found this article in internet (Following are not my scripts), am just copy pasting.. :) Nothing but for easyness to access..

This article is intended to help users setup SCP (SecureCopy) on their SPLAT gateways. This is the secure and preferred method of file transfers to and from gateways, as opposed to unsecured FTP. I use putty for SSH and WinSCP for SCP, they are both free programs, but you can use whatever clients you want.NOTE: represents the username(s) you will be adding. For example, my username will be xxxx

1) Add users to each gateway you manage
a) SSH (or console) to gateway and enter expert mode
b) At the command prompt, type: adduser
c) Enter and confirm password for this user
d) Repeat steps a though c for each user to be added
NOTE: If you are unfamiliar with operating in the vi editor, please search for a command list or call your support vendor for assistance

2) Add users to the scpusers file
a) At the command prompt, type: vi /etc/scpusers
b) Type: i <== to enter insert mode
c) Type: <== repeat adding usernames - 1 per line
d) Exit insert mode with the [ESC] key
e) Type: :wq! <== The colon enters command mode and then writes and quits the editor

f) Verify the changes at the command prompt by typing: cat /etc/scpusers <== You should see your users there, one per line

3) Change the new SCP enabled user's default shell to always be in expert mode. At the command prompt, type: chsh -s /bin/bash That's it! Using your preferred SCP software and provided you have the appropriate rules in place for your IP to access the box, you should now be able to complete secure file transfers to your SPLAT gateways.